Premium Digital Carbonless Paper
Loose sheets
Sets are just printed and
stacked. Copies are then distributed right
away.
|
|
Pads
Sets are all
blocked together to create one pad of forms. The
forms should be jogged on the edge to ensure a
level stack. The stack should be glued on one
edge using using padding adhesive (040L00922).
Separated sets of
forms
Rather than being blocked
together, this method produces separate sets of
forms, which can be fanned apart from each other
once the glue is dry.
Fan-apart glue is
latex based and weaker than PVA. This, combined
with the special release coating on the back of
the CF sheets, results in separation between
sets and the desired fan-apart
effect.
Important In contrast to PVA
glues, its vital to use Xerox Fan-apart glue
with Xerox Carbonless paper. Every Fan-Apart
glue is specifically formulated for a given
Carbonless paper, hence we cannot guarantee
results with non-Xerox glue.
Xerox
Fan-Apart glue, part number 008R07870, contains 1
Litre and glues 25 reams of paper.
|
 |
Stapled sets of
forms
It is so easy! A lot of laser
printers can now staple sets as they print. For
small and medium quantities, you may want to do
it manually.
|
|
Perforating
For best runnability on your
laser printer and perfect separation, use Xerox
pre perforated sheets which are perforated on
the production line.
|
|
Punching and
drilling
Xerox Carbonless Paper can be
punched or drilled. It is recommended to punch
or drill half a ream or less at a time to avoid
chads being left in the ream. Change punching
and drilling tools frequently to get clean holes
and no paper fibres left that could generate
jams in copiers and laser
printers.
Remember, Xerox offers
custom/bespoke items that can be manufactured to
your exact size and punched in the roll during
production for optimum quality and printing
productivity.
Guillotining
All
Xerox Carbonless Paper can be guillotined.
However, fan apart gluing using Xerox glue is
much better using sheets that have been
manufactured to the exact size during
production.
When cutting Carbonless
Paper, the clamb pressure of the knife should be
MINIMAL. In any case, the guillotine blade
should be pretty new and very sharp.
Care
should be taken since sensitive and delicate
paper stocks can be damaged or marked during the
cutting process. |
|
|
| |
